As night falls, the Hua Deng is at the beginning, located at the intersection of 256 Provincial Road and Beihuan Road in Houjie, Dongguan. In the Huijing Huafu Community, a brand new LED street lamp will decorate the night scene beautifully, and the road inside the whole district appears. Quiet and peaceful.
This is invested and built by Dongguan Yingtong Photoelectric Lighting Technology Co., Ltd. (referred to as Yingtong Optoelectronics). It adopts the EMC model for the first residential district in Dongguan, and implements energy-saving renovation to achieve full coverage of LED lighting .
Owner Mr. Chen: Intelligent LED lighting, humanized design, warm heart
When the renovation project was completed, Mr. Chen, the owner of Huijing Huafu, found that the lights in the garage were different from the past. These lights were brighter than before, and they were only shimmer before entering, but they were glimpsed when entering. The ground is lit up.
Later, Mr. Chen learned that the garage uses an acousto-optic control intelligent lighting system, which can achieve 24-hour lighting and achieve the lowest energy consumption. After carefully observing the LED lighting renovation of the whole community, Mr. Chen also found that the design of the LED lighting system is more user-friendly. Compared with the past, not only the scope of illumination is wider, but also the things are clearer, and few dark corners are found. .
Property Manager Cao: The complaint is less, the maintenance becomes simpler, and you don’t have to spend a penny.
“We have more than 500 homeowners in our community. In the past, our property has been repeatedly complained about the maintenance of incandescent lamps and energy-saving lamps. At least dozens of them have to be changed every day, especially the corridor lighting, and some have just been replaced. However, it quickly broke down. The owners mistakenly thought that our property was not working, so they were always looking for new solutions.†Mr. Cao, the property manager of Huijing Huafu, said, “We have been paying attention to high energy efficiency, long life and environmental protection. LED lighting, which has many advantages, but did not find a suitable supplier, spent a lot of money, and left a lot of roads."
Until after contact with Yingtong Optoelectronics, Huijing Huafu adopted the plan of Yingtong Optoelectronics to renovate the corridor lights, garage lights, street lamps, etc. with 3W and 12W led lamps , and the estimated cost during the contract period will reach more than 400,000 yuan.
“Yantong Optoelectronics has done a good job in energy-saving retrofits. From the point of view of the power of replacing lamps, energy saving can reach more than 70%, and long-term maintenance is not required. Labor costs are reduced, and complaints from owners are also less. The key point is that we can spend no money on this investment in energy-saving renovation."
Yingwei Optoelectronics Operation Center Du Wei: EMC mode to achieve win-win situation
“This transformation adopts the contract energy management (EMC) model that Yingtong promotes. Huijing Huafu enjoys the new achievements of LED lighting for free, and also realizes on-demand lighting through intelligent control system, saving the large amount of electricity while saving. I went to the trouble of lamp replacement maintenance.†Du Wei, the operation center of Yingtong Optoelectronics, said, “With the EMC model, many parties have benefited, not only have received policy support and favor from the owners, but also reduced energy consumption and environmental pollution, and the people Really enjoy the low-carbon life brought by the new light source. The EMC model of Yingtong Optoelectronics is very mature. In addition to the residential property, the energy-saving renovation projects in factories, hypermarkets, hotels, banks and residential properties are also fully paved. open."
The handheld addresser is used to program the address of the monitoring module offline. When in use, connect the two output wires of the handheld encoder to the communication bus terminal (terminal label 1, 2) of the monitoring module, turn on the black power switch on the right side upwards, and press "ten Add", [Subtract ten", [Add one place" and [Subtract one place" to program the address.
Position Encoder,Magnetic Rotary Encoder,Hybrid Encoder,Channel Encoder
Changchun Guangxing Sensing Technology Co.LTD , https://www.gx-encoder.com