Application:
For installation requiring flexible connector cable to fulfill measuring. Controls & command application etc. Computer Interconnection, Data Transmission, Charge Circuits, Industrial Equipment Control, Digital TV,
Reference standard :UL Subject 758, UL1581 & CSA C22.2 No.210.2
Conductor: Stranded Tinned or Bare Copper
Insulation: Â Â Â Â Â Â PE Â & Â SR-PVC Â Â
1st screen:      AL-Mylar Wrap, Overlapping
Drain wire : Â Â Â Stranded Tinned copper
Braid shield; Â Tinned Copper >85% Â
Jacket: Â Â Â Â Â Â Â LSZH/PVC
Bending Test: Â Â Â Â Load 500g , over 5,000 times
Rated voltage: Â Â Â Â Â Â Â Â Â Â Â Â 30V
Rated temperature: 80degree
Fire Rating:
UL VW-1
UL2547 Cable: Muti-conductor Shielded  Cable
Application:
For use in recording studios,sound systems and electronic circuits
Standards:
UL Subject 758, UL 1581 & CSA C22.2 No.210.2
Construction:
Conductor: Stranded Tinned or Bare Copper
Insulation:       Colour-coded  SR-PVC  Â
Shield; Â Â Â Â Â Â Â Â Tinned Copper >85% Â
Jacket: Â Â Â Â Â Â Â PVC
Mechanical Properties:
Rated temperature: Â Â Â Â Â Â 80 degree
Bend radius; Â Â Â Â Â Â Â Â Â Â Â 10XD
Bending Test: Â Â Â Â Load 500g , over 3,000 times
Operating temperature range: Â Â -20 to 70 degree
Electrical Properties
Rated voltage: Â Â Â Â Â Â Â Â Â Â Â Â 30V
Fire Rating:
UL VW-1 & CSA FT1 vertical flame test
 UL20276 Cable:  Muti-conductor Computer Cable
Application:
For installation requiring flexible connector cable to fulfill measuring. Controls & command application etc. Computer Interconnection, Data Transmission, Charge Circuits, Industrial Equipment Control, Digital TV,
Reference standard :UL Subject 758, UL1581 & CSA C22.2 No.210.2
Conductor: Stranded Tinned or Bare Copper
Insulation: Â Â Â Â Â Â PE Â & Â SR-PVC Â Â
1st screen:      AL-Mylar Wrap, Overlapping
Drain wire : Â Â Â Stranded Tinned copper
Braid shield; Â Tinned Copper >85% Â
Jacket: Â Â Â Â Â Â Â LSZH/PVC
Bending Test: Â Â Â Â Load 500g , over 5,000 times
Rated voltage: Â Â Â Â Â Â Â Â Â Â Â Â 30V
Rated temperature: 80degree
Fire Rating:
UL VW-1
UL2547 Cable: Muti-conductor Shielded  Cable
Application:
For use in recording studios,sound systems and electronic circuits
Standards:
UL Subject 758, UL 1581 & CSA C22.2 No.210.2
Construction:
Conductor: Stranded Tinned or Bare Copper
Insulation:       Colour-coded  SR-PVC  Â
Shield; Â Â Â Â Â Â Â Â Tinned Copper >85% Â
Jacket: Â Â Â Â Â Â Â PVC
Mechanical Properties:
Rated temperature: Â Â Â Â Â Â 80 degree
Bend radius; Â Â Â Â Â Â Â Â Â Â Â 10XD
Bending Test: Â Â Â Â Load 500g , over 3,000 times
Operating temperature range: Â Â -20 to 70 degree
Electrical Properties
Rated voltage: Â Â Â Â Â Â Â Â Â Â Â Â 30V
Fire Rating:
UL VW-1 & CSA FT1 vertical flame test
Â
2.0mm (0.079") Pitch Female Headers
Overview
2.00 mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. Options include through-hole, surface mount and can be customized for mixed technology, press-fit and pass-through terminations. The pins and blades are available in various sizes, counts, amperages, and plating.
The 2.0mm pitch female headers are commonly found in PC`s and are also made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.
Applications of 2.0mm Pitch Female Headers
Electronics:
LED applications
Arduino boards
Solar applications
Weighing systems
Appliances:
Air conditioner
Refrigerator
Microwave oven
Washing machine
Water heater
Shower toilet
Washer/Dryer
Stove
Automotive, Heavy Duty Military and Marine
For densely packed equipment requiring weight reduction and downsizing and for tough and harsh conditions.
Vehicle infotainment
Computer peripherals
Battery Connections
Battery connections rely on the ability of the current to pass reliable and solid current. This prevents overheating in the circuit and voltage drop.
Rechargeable battery packs
Battery balancers
Battery eliminator circuits
Medical Diagnostic and Monitoring equipment
Heart monitors
Communications
TelecomsDatacoms
Mount Type: Through-hole vs Surface Mount
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
2.0mm vertical single row female header, 2.0mm vertical dual row female header, 2.0mm right-angle single row female header and 2.0mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
2.0mm Right-angle Dual Row female header, 2.0mm SMT Single row female header and 2.0mm SMT Dual row female header are Antenk`s SMT female headers.
Soldering Temperature for 2.0mm Pitch Female Headers
Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.
Orientation/Pin-Type: Vertical (Straight) and Right-Angle
2.0mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.
Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.
PCB Connector Stacking
For 2.0mm pitch female headers, the orientation is either offered as vertical or right-angle, which are options. Elevated sockets/female headers can be available upon request.
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.
Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.
Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.
Single, Dual or Multiple Number of Rows
For a 2.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.
Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Custom 2.0mm Pitch Female Headers
Customizable 2.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
2 Pin Header,2.0Mm Female Pin Header,2.0Mm Pcb Connector,2.0 Pcb Header,0.079" Pitch Female Headers,2.0mm Female Pin Header SMT, 2.0mm Female Pin Header THT
ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com