When my friend recently used the smart TV, he also encountered a question: "I want to install a game application. As a result, the TV always prompts the installation to fail and the memory is insufficient. What should this be?"
In fact, there are a few friends who have encountered this problem. There are several reasons for the lack of memory:
1, it is really installed too many applications, and the TV itself provides less memory, it is easy enough to make it.
Here I have to remind you about the difference between GB and Gb, now most of the digital devices are marked as GB, there may be some smart TV memory marked Gb, although there is only one case difference, but the actual size difference is 8 Times, because 1GB = 8Gb. So many smart TVs are marked with 8Gb. Actually, we only say 1G memory, which is a small amount of misery.
2, the installation path is not set correctly.
For smart TVs, applications can be installed in an external SD card besides the built-in storage space, but most homes will not be equipped with SD expansion cards, but TVs sometimes have the default option installed in SD. In the card, an installation failure prompt appears. At this time, you only need to change the installation path.
3, after the installation did not sort out, causing too much garbage.
Some friends found that there are not many applications installed, but there is insufficient memory. This situation is likely to be that you have downloaded a lot of content is placed in the TV memory, but did not delete, resulting in insufficient memory. To solve this problem, you can download some clean-up software to clear the memory.
Xiao Bian recommends that readers download and install the sofa butler (http://). There are optimization tools for you in the rightmost tool box.
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Meter Plug Energy Monitor,Backlight Power Metering Socket,Blue Backlight Power Meter Socket,Multi-functional Backlight Power Meter Socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com