With the large use of high-power LED light sources , the technical requirements for LED drivers are increasing. High-voltage, high-power LED drivers can be connected directly to the grid (85V-265V). Can provide 100W of power. These drivers typically provide high current, high voltage output and are highly efficient. At the same time, various protections are provided to improve the reliability of the drive.
Design of drive circuit based on AX6066+A433LED
The AX6066 is a converter with output power between 12 watts and 65 watts with primary feedback. The AX6066 is suitable for AC/DC power supply applications and can meet the application requirements of AC lines with low power consumption and high average operating efficiency under no load conditions. The chip can control the converter to operate in a discontinuous state mode. The discontinuous mode of operation provides a unique safety current limit that is also insensitive to signal jitter on the AC line. Peak current modulation mode does not require slope compensation.
The AX6066 works by driving the source of an external high voltage power tube. This structure is called a common-base, common-emitter (source-level) drive. It highlights the two advantages of fast start-up and the ability to ensure that the control chip is not connected to high voltage without load. There is no effect on the normal operation of a converter with a feedback flyback structure.
The feedback pin accepts current instead of voltage. In an unloaded operating state, this design minimizes the power dissipation of the primary side by avoiding the external resistor's energy consumption from current to voltage.
With constant peak current and varying off-time modulation, the AX6066 has the highest average efficiency between peak power and 22% peak power. The AX6066's internal modulation tends to keep its power between 22% and 100% peak load, eliminating design challenges and making the converter's average efficiency reach the energy star rating.
Common base, common emitter bias and start
The AX6066 uses a common-base, common-emitter drive and bias to control the high-voltage power tube and provides an initial bias at startup. This common-base, common-emissive structure implements a common gate control by low-voltage control of the switches connected between the ground and the source of the high-voltage power tube. There are the following key points to note:
1. The DC voltage of the external high-voltage power tube should be applied.
2. The external high voltage power transistor is driven by the source, not the gate.
3. All current in the initial coil must pass through the internal low voltage drive tube.
The AX6066 integrates a 90mΩ low voltage switch FET with all associated current sensing and drive. The external high voltage power tube is forced to follow the internal fast low pressure drive tube. The drain and gate of the external high voltage drive tube does not affect the speed of the shutdown because the gate is connected to a separate DC supply. This common-base, cascode structure allows the external high-voltage power tube to be turned off quickly, and the switching losses of the FET switch are also reduced.
PS5 Vertical Stand Cooling Fan
Our vertical stand some are multifunctional ,some with Headset holder.
- [All in One]Designed specifically for the PlayStation 5 console (Disc or Digital versions), the DualSense controller, and PS5 game cases, this black cooling stand perfectly matches the aesthetic design of the PS5.
- [Efficient Cooling System]The dual-fan cooling system dissipates heat from your PS5 console quickly and efficiently. Variable speed fans power up or down based on the cooling needs of your system, for low noise output while maintaining maximum cooling efficiency.
- [Dual Controller Charger]Charge up to two DualSense wireless controllers at the same time using fast charge technology without having to connect them to your PS5 console. The click-in USB Type-C controller charger adapter is easy to use and protects your controller shell from scratches.
- [Multifunctional Stand]Includes extra USB port that can be used to charge or connect to other external devices like tablets, phones, and cameras for data transfer and charging.
-
[Headset and Remote Holder]Detachable headset stand with 2 cable hooks, firm and stable for your PULSE 3D wireless headset; moreover, always put your media remote down on the same, designated holder when not in use saves you much precious time looking for it next time
Ps5 Vertical Stand Cooling Fan,Ps5 Console Cooling Fan Stand,Ps5 Vertical Stand,Vertical Stand
Shenzhen GEME electronics Co,.Ltd , https://www.gemeelectparts.com