Precautions for using energy-saving lamps

When using an energy-saving lamp, pay attention to the use voltage marked on the lamp. If the low-voltage sodium lamp is used under a high-voltage power supply, the lamp will be burned. At the same time, we must also pay attention to selecting quality-qualified brands whose national approval numbers, plant sites, and telephones are clearly defined, and be vigilant and refuse to use inferior products. Try not to choose brands that do not have a site or a site that is ambiguous.

Pay attention to the power of selecting and using the lamp correctly. In general, energy-saving lamps are five times more luminous than incandescent lamps. For example, in a room with a 60-watt incandescent lamp, you only need 13 watts for energy-saving lamps. You can choose different energy-saving lamps according to the brightness you need.

To minimize the number of light switches. It is understood that each time the energy-saving lamp is switched, the service life of the lamp will be reduced by about 3 hours. If you do not want to change the lamp frequently, it is better to reduce the number of switches.

Pay attention to replacing the new lamp in time. After using the lamp for a period of time, the luminous flux will greatly decrease and the lamp will become darker. In this case, it is necessary to replace the new lamp in time to maintain the best effect of the light in the room.

Energy-saving lamps have many advantages. They are more complex than light bulbs, and they have a variety of options such as color temperature, color rendering, and power. Therefore, buyers need to learn and master certain professional knowledge.