Passing iWatch will use low power LED screen

The smart watch is an extension of the smart phone function. For the use of the watch, frequent charging will cause considerable inconvenience, so how to make the smart watch have strong battery life is a thorny problem faced by various manufacturers. Currently, Samsung and Sony are racking their brains, and Apple, which is about to launch iWatch, is actively looking for a solution.

According to foreign sources, Apple has acquired LuxVue, a micro LED technology research and development company. Many people believe that Apple's acquisition is mainly to provide iWatch with strong technical support.

The general display technology is to put a white light on each pixel to filter the unwanted color. The technology of LuxVue is different. It is to put two red, green and blue LED lights at each point. This not only greatly enhances the brightness (about 9 times the normal), but also effectively reduces energy consumption and improves battery life.

In addition to solving the problem of the life of a smart watch, this LuxVue technology can also be applied to curved screens.

Power+ Signal Power Connector

power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively

Product features

High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material

Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm

The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A

Power+ Signal Power Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com