Evluma Clearlight LED luminaire receives International Dark Sky Seal of Approval
Date Announced: 07 Oct 2009
Evluma, a manufacturer of energy efficient SSL lighting products, announces that its product, the Clearlight, a 40W LED replacement lamp for 50-175W MV or 70-150W HPS lamps used in NEMA Type 5 fixtures, has qualified for the International Dark Sky Association (IDA) Dark Sky Seal of Approval. The Clearlight is a Full Cutoff retrofit lamp. No light is emitted above 90???.
The mission of the International Dark-Sky Association (IDA) is to preserve and protect the nighttime environment and our heritage of dark skies through environmentally responsible outdoor lighting.
"A dark-sky friendly retrofit for the dusk-till-dawn 'glare bomb' is a wonderful thing," said IDA Managing Director, Pete Strasser. Approved devices receive a certificate and use of the Seal of Approval. Manufacturers may use this seal To promote and advertise their IDA approved dark sky friendly products.
Light pollution is defined as excessive and inappropriate artificial light. Light trespass, light falling where it is not intended, wanted, or need, and glare contribute to light pollution. MV and HPS bulbs emit light in a globe and above 90??? Light becomes glare and ceases to contribute to lighting the task area on the ground, says Evluma.
"Light scattered into the sky is wasted light. Wasted light is wasted energy," said Cathleen Shattuck, Creative Director at Evluma. The Clearlight was specifically developed to be an energy efficient, dark-sky friendly, mercury free alternative to outdoor MV or HPS Lighting.
With a power factor of ≥ 0.9 and the ability to bypass the legacy ballast, the Clearlight uses over 75% less electricity than a 175W MV lamp, says the company. An active cooling system keeps the thermal junction temperature low, resulting in long life and Delivering an estimated L70 at 70,000 hours or longer.
Evluma will be attending the International Dark-Sky Association Annual Meeting and Conference to be held in Phoenix November 14-15, 2009.
About Evluma
Evluma is a division of Express Imaging Systems, LLC a company with over 150 years of combined experience developing lighting applications for photographic equipment and the photofinishing industry. Formed in 2008, Evluma is committed to developing environmentally low impact lighting solutions that are affordable and long lasting .
About International Dark Sky Association
The International Dark-Sky Association (IDA) seeks to preserve dark skies worldwide for the benefit of society by promoting good outdoor lighting and educating the public on the rewards of preserving the stars. Light pollution is an increasing problem, threatening astronomical facilities, ecologically Sensitive habitats, our energy consumption, and our human heritage. IDA was founded in 1988, by Dr. David L. Crawford and colleague Dr. Tim Hunter, to address the growing problem of light pollution.
Contact
Keith Miller, 206-720-1798 ext 115
International Dark Sky Association, (520) 293-3198,
E-mail:
Web Site:
• Tilt type (basic type) can only fix the TV on the wall and adjust the TV view angle after installation. These mounts just consist of 3 parts, 1 wall plate and 2 arms. Screw the wall plate on the wall, assemble the tilt know to the arm, after that screw the 2 arms on the back of the TV. Hang the arms to the wall mount, tighten the 2 screws on the downside of the arm with the wall plate. You have installed the TV.
Want to change the TV view angle? Just loose the tilt know at the side of the arm to your required angle and tighten it.
Always remember to check the TV VESA before you mount the TV on the arm.
Tilt Tv Wall Mounts,Articulating Arm Tv Mount,Tv Tilt Wall Mount,Tv Wall Bracket Tilt
Pingxiang AVR Accessories Import & Export Co., LTD. , http://www.avrmount.com