The adjustable angle of the cabinet is 0-7.5°, 1° per step, the rigging hardwares are made of high strength steel. It is safe enough to hang 16 enclosures together, as the safety factor will reach up to 7:1.
The enclosure is constructed by multi-plywood, with panel in size 18mm, and other parts in size 15mm. It is finished with gray textured water paint. Two recessed handle cups are mounted on both sides of the enclosure for easy lifting and carrying. The rear panel connector plate carries 2 Neutrik Speakon NL8MP connectors for loop in and loop out connections. Besides, the enclosure is well protected by the gray mesh grill with acoustically reticulated foam.
Â
| TECHNICALÂ SPECIFICATION | |
| FREQUENCY RESPONSE: | 50Hz-16KHz(±3dB) 40Hz-18KHz(-10dB) |
| NOMINAL COVERAGE (-6dB): | 90°(H)7.5°(V)  adjustable |
| SENSITIVITY(@1w/1m): | HF:113dBÂ SPLÂ MF:105Â dBÂ SPLÂ LF:100Â dBÂ SPL |
| POWERÂ RATINGÂ (AES):Â | HF/MF/LF:160W/350W/800W |
| NOMINALÂ IMPEDANCE: | HF/MF/LF:16/16/12Â Ohm |
| MAXIMUMÂ SPL:Â Â Â Â Â Â Â Â Â | HF135/141Â dBÂ MF:130/136Â LF;129/135Â dB |
| DRIVERS:          | LF 2 x 12" (75mm Voice coil) neodymium woofer;       MF 1 x 10"(65mm voice coil)neodymium mid-range;    LF  2 x 3" neodymium compression driver |
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | |
| PHYSICALÂ DATA | |
| DIMENSIONS(H x W x D): | 367 x 1000 x 550mm |
| WEIGHT: | 65kg |
| CONNECTORS: | 2 x WP7 connectors |
| SPEAKER CABLES: |  1-2+…LF 3-4+…MF 5-6+…HF |
| MATERIALS: | 18mm,24mm birch plywood |
| FINISH: |  Black water paint |
| GRILLE: | Black epoxy mesh grille with acoustically reticulated cloth |
| RIGGING |  0,1 ,2,3,4,5,7.5 degree adjustable |
Applications:
Touring performance
Stadium
Theatre
Â
Feature:
Large-scale,thri-amp,three-way line array system
MF&HF parts is coaxial structure to optimise acoustic image
Neodymium high-sensitivity driver, maximum headroom
Â
Â
LA212 system advantage
1) All of speaker driver is used import and neodymuim drivers which is deal with and tested by 200 degree high temperature treatment.Â
2) The plywood, All the plywood was import from Russia. Just go ahead used in outdoor.
3) Our hander cup is the same as LA, D&B. All of our spare parts are used penn elco
4) the pin, our pin was use stainless steel , and must be pass 7:1 safe factor weight test. As you are a professiona people, you must know how important about the pin. If te pin is not good. It is danger when you rigging the line array speaker in the air."
5) Our design, the length about our speaker is 1000mm and 65KG. This is few factory can do that small size with maximum heatroom, We also use mort than ten years to choosie the best speaker drive for our line array speaker system. And our MF&HF parts is coaxial structure to optimise acoustic image. We can repair it when the speaker was in problem.
6)  LA212 is recommanded to match LA215S (double 15" flying sub), S118H, S218H(,SS2 single and double 18" horn loaded subs) powerful subwoofers.
7) All the technoloy data is real. We use SMAART7, 3D directionality test, and CLIO electroacoustic measuring system, audio precision test,And all the data is open. We also have our own EASEFOCUS data and GLL picture.
Â
FAQ:
For DC Gear Motor, the most common voltage is 3v, 6v, 12v and 24v. Certainly this specification is customized. If customer request 3.7v or 18v, that would be no problem.
For some application, energy saving is necessary.
For example, there are electronic lock on Mobike or OFO. Since the motor need last long hours working, so they common request the motor voltage no more than 3.7v.
We can also call 3V Dc Gear Motor low voltage Dc Gear Motor, the most important characteristic is energy saving.
3V Dc Gear Motor,3V High Torque Dc Motor,3V Miniature Dc Gear Motor,3V Mini Dc Gear Motor
SHENZHEN DONGMING MOTOR CO., LTD. , http://www.dmdcmotor.com