☆FEP Teflon Heat Shrink Tubing Features:
â—† 1. FEP pipe is made of imported PTFE, with high temperature resistance and corrosion resistance. It can be used to transport gas, water, acid, alkali and most chemical solvents.
◆ 2, temperature: -60 °C to 200 °C.
â—† 3, working pressure: 15kg/cm2
â—† 4. Note that the larger the pipe diameter, the smaller the working pressure.
☆ Product Application:
Aerospace Transportation Technology, Electronics, Components & Insulators, Chemicals & Pharmaceuticals, Food Processing, Environmental Sciences, Air Sampling, Fluid Handling Equipment, Water Treatment Systems
PTFE Teflon heat shrinkable tube uses Shrinkage temperature: 300°C~340°C, non-adhesive, fight against water, contact angle of oil and water θ=114,
Does not burn in non-flammable air (Oxygen Index >95VOL%)
Corrosion resistance
Only at high temperature, elemental fluorine and alkali metal work with it, and it has no effect on the reliability and high insulation of all other concentrated and dilute inorganic organic acids, bases and esters.
The dielectric constant of 60HZ-60MHZ is 2.1 at high and low temperatures. Even if the surface is damaged by diving, no conductive track will be produced. Volume resistance>1018ΩM, surface resistance>1013Ω, arc resistance>165 seconds without leakage, low friction, dynamic friction coefficient 0.2-0.3
Shrink ratio: 1.8:1
Continuous use temperature: -55~260°C
Teflon heat shrinkable tube: Rated voltage (Rated voltange): 300/600V, Test voltage (Testing voltange): 2500V, Rated temperature: -80°C to 280°C. Teflon shrink sleeves have high temperature resistance, corrosion resistance, and good mechanical strength. Widely used in electronics, computers, chemicals, electric heating, aerospace, military, communications and other important science and technology industries.
Physical characteristics
project
experiment method
unit
Characteristic requirements
proportion
ASTMD792
G/cm
2.16
tensile strength
ASTMD638
Mpa
24.5
Elongation
ASTMD638
%
350
Bending coefficient
ASTMD790
Mpa
490
Impact strength
ASTMD256+23°C-54°Cj/m
-No break-107
hardness
ASTMD2240
°C
55
Coefficient of friction
°C
0.1
Melting point
327
Operating temperature
260
Flammability
UL-224
VW-1
Dielectric constant
ASTMD150
2.1
Dissipation factor
ASTMD150
0.0002
Arc coefficient
ASTMD495
S
>300
Volume resistivity
ASTMD257
/cm
>1018
Weather resistance
Weather-o-meter (2000h)
No break
Solubility resistance
ASTMD543
Excellent
Chemical resistance
ASTMD543
Excelle
KNM3 Series Moulded Case Circuit Breaker
KNM3 series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNM3 series Molded Case Circuit Breaker,Small Size Molded Case Circuit Breaker,Electrical Molded Case Circuit Breaker,Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmotorstarter.com