It's so hot this summer. It seems like it's time to put water on your host!
Now the representative of high-end water-cooled chassis is undoubtedly INWIN, but I still do not want to play the popular brand, want to try something more distinctive niche products.
COOLMAN is a domestic chassis brand, I have not heard before, but see the Beast chassis this product, still find it very novel.
The unconventional design may not be acceptable to everyone. Some people will like it; others will hate it.
45 ° diamond chassis is certainly not the first of COOLMAN, but this style is still very surprising, it is said that with a heavy 8kg of 5025 series aluminum alloy, a large area of ​​aluminum does increase the metal texture of the chassis.
The chassis is now available in red and blue, as it is still a refreshing blue in summer.
Toughened glass panels are used on both sides and are now essential for high-end chassis.
Diamond chassis design, different from the traditional square chassis shape, it is said that its design inspired by the abstract beast, but I do not have this look and feel, I think the chassis is still very refined, no animal-like kind Rough madness, of course, the personality of the chassis is indeed very strong.
In addition, such a large base design was indeed seen for the first time. And the base also has a spring damping device, there are also practical uses.
There are two big handles behind to help move the chassis.
The chassis is still based on the tower design, standard 7 PCIE baffle.
Viewed from the side, it is more like a fan shape. The I/O portion is in the rear if it is a traditional chassis. However, due to the 45° design, the I/O portion is basically in the middle. In pragmatic terms, it's really not. convenient.
Front and back: The front is basically an aluminum plate and the logo is on a piece of acrylic. In addition, there is a heat vent on the bottom and a blade of aluminum like a blade is inserted next to it.
I/O includes 2 x USB 2.0 interface, 2 x USB 3.0 interface, 1 x headphone jack, 1 x microphone interface, very regular equipment.
Acrylic logo
The blue hand-screws on the chassis, with the coolman's pattern on top, are a bit like alienated skulls, or ninja masks.
Radiant aluminum plate with vents inside the chassis panel
The glass side panels are also fixed with this blue patterned screw, and there is a soft silicone cushion to prevent wear, but I think it would be better if the hand screws were protected by a cushion.
Let's take a look inside the chassis: the official description of the graphics card length limit 430mm; CPU radiator limit height 180mm, the chassis is relatively long, the front of the space is relatively large, to provide some room for water cooling, of course, this design can also be installed EATX motherboard .
The design of the backplane is about 3cm in the space of the back line, and the management space is still enough.
Internal design, the top and front panels can be installed 120mmX3 fan or 360 cold row; the power supply compartment can also be installed on the bottom of the fan or cold row, but the location of the wind will certainly not be too good.
Provides two 3.5-inch HDD and two 2.5-inch SSD hard disk shelves
The 3.5-inch HDD disk tray uses plastic material to prevent resonance; the 2.5-inch disk tray is metal, and it actually has four mounting positions, but only two disk trays.
The installation part of the power supply does not have a dust-proof net at the bottom of the heat-dissipating opening, and there is no other shock-absorbing or auxiliary fixing design than the screw fixing.
The front aluminum plate is screwed by hand and it can be removed. The thickness of the aluminum plate is about 3mm, and the material used is very large.
The base is also removable.
To call the base, there are actually 7kg+, some of the weight of the tower chassis may also be these.
Remove the base is a normal chassis structure, the surface looks like a car paint process, the cooling part still does not have a dust-proof net.
After removing the aluminum panel on the outside of the chassis and the glass panels on both sides, there are 8kg+. It is estimated that the weight of the entire chassis is about 17-18kg. It is really an effort to move it.
The installation of a fan or cold row does not actually require removal of the external aluminum panel. There is a shelf that can be fixed separately to complete the installation of the fan and cold row. The screws are fixed on the side of the chassis and can be removed after removal.
to sum up
advantage:
1. Strange modeling, excellent workmanship
2. The materials used are very abundant, and there are few places where the chassis uses polymer materials, and the metal texture is high.
3. The chassis structure is still suitable for split water cooling.
insufficient:
1. There is no air filter
2. The location of the I/O section is not very convenient from the perspective of usage.
3. The use of material enough to bring the weight of the entire chassis is overweight, to move really tired.
All-aluminum metal material + glass double-sided chassis is a symbol of high-end chassis, but also a standard for many players to choose the chassis, COOLMAN Beast chassis will undoubtedly meet this standard, but whether the design can make everybody satisfied is not easy to say, after all, " There are one hundred Hamlets in the eyes of a hundred people. Of course, I am full of liking. This angle is like an open head and I am about to fly.
Purchasing hardware and water cooling parts, look forward to my water cooling machine!
Frame For Iphone X13 Pro,13 Promax Frame With Glue,Metal Frame For Iphone 13Promax,Lcd Frame For Iphone 13Promax
Shenzhen Xiangying touch photoelectric co., ltd. , https://www.starstpmobile.com