Shanghai Longmao Microelectronics Co., Ltd. further developed a program dimming system for successful AC LED street lights after the successful dimming of solar LED street lights. The system uses the same principle to perform pulse width modulation (PWM) program dimming of LEDs. With this new dimmable controller SLM4801, curve dimming can also be performed, thus saving a lot of energy. As shown in the figure below, if you use curve dimming, you can save at least 40%.
This controller connection is very simple, just connect two power input lines and one PWM dimming output line. The power line is the DC voltage applied to the LED constant current drive module, so there is a positive (red) negative (black); and the PWM dimming output line (blue) is added to the LED constant current with PWM dimming function. The dimming control line on the drive module.
With a single controller, several constant current control modules can be controlled simultaneously. The number of controls that can be controlled is virtually unlimited, since controlled constant current modules have input impedances above 100k ohms. The figure below is a schematic diagram of the overall block diagram of controlling multiple constant current modules.
Therefore, in order to achieve dimming, a constant current driving module with a PWM dimming input control line must be used at the LED end. Longmao can provide constant current drive modules with PWM dimming input control lines, including step-up and step-down, with models SLM2842Sd and SLM2842Jd.
The technology has been patented. (This article by Aladdin Lighting Network blog channel special column expert Mr. Mao Yuhai provides Aladdin lighting network Mao Yuhai blog)
Lighting: exquisite tailoring into the image of the city, evening wear 2009-06-04
Philips lighting green factory interprets new ideas for production 2009-06-04
Philips calls on the business community to seize the opportunity of energy-saving lighting 2009-06-04
Philips Lighting Green Bookstore Care Vision Health 2009-06-04
Dinghui Lighting: Creating a top-level commercial photo kingdom (Photos) 2009-06-04
1
Building Cables
they are suitable for power & lighting circuits and building wiring. Also suitable for use as an earth wire the internal wiring of appliances and apparatus.
- Standard applied: IEC60227, BS 6004
- U0/U: 450/750V
- Certification: CE
- Flame retardant or fire resistance or Low smoking and Halogen free or other property can be available
Building Cables,House Wiring,Building Wire,Building Wire And Cable
Shenzhen Bendakang Cables Holding Co., Ltd , https://www.bdkcables.com