2. When starting or shutting down the electrical equipment, the switch must be tightened or pulled to prevent the connection from being connected. When using electronic equipment, you should first understand its performance and operate according to the operating procedures. If the electrical equipment is overheated or has a burnt smell, immediately turn off the power.
3. When the personnel leave the room for a long time or the power supply is interrupted, the power switch should be cut off, especially to cut off the power switch of the heating electrical equipment.
4. When the fuse of the power supply or electrical equipment is blown, the cause of the blow should be first checked. After the fault is removed, replace the fault with the original fuse and replace it with a suitable fuse. Do not arbitrarily increase or replace it with other metal wires.
5, fixed carbon, fixed-flow electric furnace, silicon carbon rod box or furnace rod end, should be equipped with a safety cover. Equipment that should be grounded should be properly grounded to prevent electric shock.
6. Pay attention to keep the wires and electrical equipment dry and prevent the lines and equipment from being exposed to moisture.
7. There should be no exposed wire ends in the laboratory; in the power switch box, items are not allowed to be stacked to avoid electric shock or burning.
8. Be wary of sparks or static electricity in the laboratory, especially when using flammable gases that may constitute explosive mixtures. In the event of a fire on the wire, do not use water or a conductive acid-base foam fire extinguisher to extinguish the fire. Turn off the power and use a sand or carbon dioxide fire extinguisher to extinguish the fire.
9. Personnel who have not mastered the safe operation of electrical appliances shall not arbitrarily change electrical facilities or arbitrarily dismantle electrical equipment.
10. When using high-voltage power, follow the safety regulations, wear insulated rubber shoes, gloves, or use a safety lever.
11. Connect the line first and then plug in the power supply during the experiment. At the end of the experiment, the power must be cut off before the line is removed.
Intelligent Hotel switch is the general name of hotel switch series. Hotel switches are classified according to different use occasions. All kinds of switches include: doorbell switch, key card switch, service request switch, lighting control switch, bathroom control switch, dimming switch, curtain switch, air conditioning switch, switch socket, hotel room number, etc. Hotel switch panel types include a full set of switch touch switch panel, light touch switch panel and reset switch panel, light dimming switch, intelligent voice control switch. According to the hotel decoration style with different styles of switch, to improve customer experience, so as to improve the brand competitiveness of the hotel. At present, the hotel industry is moving towards intelligent development, which is also the future development trend of the hotel industry. Shenzhen Zhuohao smart appliance is committed to continuously investing in the intelligent hotel industry to develop and produce more competitive products to meet the different needs of customers.
Smart Hotel Socket,Smart Hotel Switch, remote switch, switch for hotel, smart light switch, universal socket, power socket
Shenzhen Zhuohao Intelligent Electronic Development Co., Ltd. , https://www.actopsmarts.com