According to Ronda, the newly released 6-watt LED candle bulb has a luminous flux of 335 lumens, which is more than double the LED candle bulb on the market. The light distribution is bright and even, which can add the brilliance of gorgeous crystal lamps. In addition, high color rendering (CRI > 95) and high efficiency specifications can effectively reduce the heat of the luminaire while presenting the best skin tone.
Following the release of 1,000 lumens of lightweight bulbs at the end of last year, Ronda introduced a high-brightness bulb with a brightness of up to 1,500 lumens with a luminous efficiency of 95 lm/W and a new generation of highly thermally conductive insulating materials that can be reduced to 75 grams. LED bulb products have set a new generation of specifications and become the new choice for 100-watt replacement LED bulbs.
In addition, Ronda has introduced the lightweight A-Lamp series from 25-watt, 40-watt to 60-watt replacement LED bulbs. This series of light bulbs is only 53 grams lighter, which is 50% lighter than the heavy heat sinks in the past. It is not only cost-effective, but also easier to install. In addition, the full range of A-Lamp bulbs meets the international A55 size specifications and can be used in a variety of luminaires. Lightweight materials and mechanical design significantly reduce the carbon footprint of the product, in line with the trend of international green products.
In the improvement of light type, Ronda uses wide-angle technology to achieve full-circumference type, and the illumination angle is increased from 120 degrees to 270 degrees of the existing LED bulb, which can greatly improve the light quality of the illumination. Ronda claims that this series of A-Lamps is suitable for the Japanese market, which focuses on light quality and detail, emphasizes environmental protection and the use of bulbs, and the entire series of products are designed to meet the international safety certifications such as CE and PSE. The competitiveness of lighting products in the international market.
Ronda particularly emphasized that the new products on display are in line with the three major trends of QCC [Quality of Light, Cost, and Control System], and fully demonstrate the company's lighting technology team. R&D achievements in three major areas, as well as the ability to provide total solutions for light, machine, electricity and heat.
Emphasis: Because of the market chaos and the cheating of bad dealers, most people simply don't understand USB 3.0 and USB 3.1. USB 3.1 Gen1 is USB 3.0. And USB 3.1 Gen2 is the real USB 3.1. The maximum transmission bandwidth of USB 2.0 is 480 Mbps (i.e. 60MB/s), USB 3.0 (i.e. USB 3.1 Gen1) is 5.0 Gbps (500MB/s), and USB 3.1 Gen 2 is 10.0 Gbps (although the nominal interface theoretical rate of USB 3.1 is 10Gbps), but it also retains some bandwidth to support other functions, so it has a good performance. The actual effective bandwidth is about 7.2 Gbps. USB 2.0 is a four-pin interface, and USB 3.0 and USB 3.1 are nine-pin interfaces.
USB 3.1 is the latest USB specification, which was initiated by big companies such as Intel. Compared with the existing USB technology, the new USB technology uses a more efficient data encoding system and provides more than twice the effective data throughput (USB IF Association). It is fully downward compatible with existing USB connectors and cables.
USB 3.1 is compatible with existing USB 3.0 software stacks and devices
USB3.1 LOGO
USB3.1 LOGO
Protocol, 5Gbps hubs and devices, USB 2.0 products.
Intel, which owns Thunderbolt technology, also welcomes the formation of the USB 3.1 standard. USB 3.1 contains most of the features of USB 3.0 [2]. USB 3.1, as the next generation of USB transmission specifications, is commonly referred to as "SuperSpeed+", which will replace USB 3.0 in the future. [3]
USB 3.1 C SMT FINISHED,DIP USB3.1 Plug,Vertical USB Connector,USB Type-c Receptacles Shell
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com