Platelet shake incubator operation method - Database & Sql Blog Articles

1. Pre-temperature: Turn on the power switch, the LCD temperature controller starts working, the “temperature measurement value” is displayed as the actual work inside the storage box, and the “set temperature” is displayed as 22°C. Then turn on the side oscillator switch and the oscillator will automatically adjust the temperature to 22 °C.

The temperature controller has been debugged before leaving the factory, the user does not need to debug, if special circumstances need to be adjusted, please follow the steps below: Click the setting button to enter the temperature setting state, modify the required value by increasing or decreasing the button; Press the set button to enter the time setting state, the time hour zone flashes, press the setting button, the time minute zone flashes, you can modify the desired value by increasing and decreasing the key, and then press the set key to save and Exit the setting status. When the time is set to “0”, it means there is no timing function; when the set time is not “0”, then the measured temperature reaches the set temperature, the timer starts counting, the time is up, the operation ends, “stop” character point When the buzzer sounds for 30 minutes, press and hold the decrease button for 4 seconds, the program restarts, and when the buzzer sounds, the increase button can be used to silence.
2. The storage box is equipped with UV sterilization lamp or illumination lamp (according to the user's needs). The UV lamp is used for disinfection and sterilization work inside the machine. The use of sterilization lamp can refer to the sterilization of general medical UV lamp. method.
3. In the non-set state, click the “Reduce/Rerun/Backlight” button to switch the backlight of the LCD screen.
1) No time setting, the LCD screen displays normally:
2) There is time setting, the LCD screen displays normally:
4. When the temperature reaches 22 °C, the pre-heating is completed, and the temperature of the storage box is constant within 20~24 °C. At this time, the thawed platelet bag can be placed on the swing frame of the storage box, and the door is closed to enter the constant temperature swing state. Then you can take it out.

Shanghai Chenxun Instrument Technology Co., Ltd. specializes in producing chromatography freezer, freeze dryer, chiller, ultra-low temperature refrigerator, thermostat, biochemical incubator, mold incubator, constant temperature and humidity chamber, light incubator, artificial climate chamber, carbon dioxide incubator , Multi-functional carbon dioxide incubator, electric constant temperature incubator, water-proof constant temperature incubator, blast drying oven, vertical blast drying oven, high temperature blast drying oven, vacuum drying oven, hot air sterilization box, dry culture Box, electric thermostatic water tank, electric thermostatic water bath, low temperature thermostat, constant temperature heating plate, integrated muffle furnace, shaker, etc. and other laboratory equipment, first-class professional, first-class service, Shanghai Chen Xun is you The best choice! Our company has a professional technical team, with strong research strength, to ensure the quality of equipment, so that the majority of users can rest assured. The following small series briefly introduces the common fault analysis and handling of the aseptic homogenizer and the precautions. Welcome everyone to come and consult.