Model NO.: SPS
Customized: Customized
Power Supply: 12-30VDC
Measuring Range: -0.1...1MPa to 60MPa
Working Temperature: -30ºC~80ºC
Material: Stainless Steel
Output Signal Type: Analog Type
Accuracy: ≤0.5%Fs
Measuring Media: Gas, Liquid
Long-Term Stability: ±0.3%Fs/Year
Temperature Error: ±0.02%Fs/°c(Zero / Full Span)
Application Field: Food and Pharmaceuticals Industry
Trademark: WNK
Transport Package: Paper Carton and as Buyer′s Requirement
Specification: SGS
Origin: Hefei, Anhui
Model NO.: SPS
Customized: Customized
Power Supply: 12-30VDC
Measuring Range: -0.1...1MPa to 60MPa
Working Temperature: -30ºC~80ºC
Material: Stainless Steel
Output Signal Type: Analog Type
Accuracy: ≤0.5%Fs
Measuring Media: Gas, Liquid
Long-Term Stability: ±0.3%Fs/Year
Temperature Error: ±0.02%Fs/°c(Zero / Full Span)
Application Field: Food and Pharmaceuticals Industry
Trademark: WNK
Transport Package: Paper Carton and as Buyer′s Requirement
Specification: SGS
Origin: Hefei, Anhui
SPSÂ Flat Membrane Vegetable Oil Sanitary Electronic Pressure SwitchThe pressure switch SPS is designed for pressure monitoring and measure-ment in liquid and gaseous media. The SPS is suited for general industrial applications such as machine and plant engineering, in machine tool systems, in hydraulic and pneumatic systems, for pressure monitoring and control and for pumps and compressors. It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs (PNP or NPN). In addition, there are configurations available with an analog output signal (0...20mA| 420 mA or 0...5V| 010 V) as well as with RS485 Link.
WNK Intelligent Switch Series:
SPS Intelligent Pressure Switch
SLS Intelligent Level Switch
STS Intelligent Temperature Switch
SPS-1 Intelligent Sanitary Flat Diaphram Pressure Switch
 Features - SPS Sanitary Electronic Pressure SwitchÂ
1.  Sanitary type used in food and pharmaceuticals industry
2. Â Gas and liquid pressure measurement
3.  PNP switching, voltage and current outputs
4.  Switching can be set normally open / normally closed
5.  Supporting Switching delay
6.  Various analog output ways available
7.  Displaying pressure peak value and environment temperature
8.  Analog output span settable
9.  OLED self-luminous display
10.  Display turnable 180°
11.  Housing with electrical connection against process connection rotatable 330°
12.  Switching points settable
13.  Various display pressure units
14.  Parameters setting up for Password protection
15.  Support MODBUS communication
Specification - SPS Sanitary Electronic Pressure Switch
Â
| Product name | Electronic Smart Pressure Switch |
| Measuring range | -0.10.1MPa to 60MPa |
| Measuring media | Gas & Fluid |
| Accuracy | ≤0.5%FS |
| Supply power | 1230V DC |
| Temp. error | ±0.02%FS/ºC(Zero/ Full Span) |
| Long-term stability | ±0.3%FS/Year |
| Analog output accuracy | ≤±0.2%FS |
| Output configurations | 2×PNP + 0V~5VDC/10VDC + MODBUS |
| 2×PNP + 0mA/4mA~20mADC + MODBUS | |
| Switch current | 1.0A(Max.) |
| Switching type | Normally open / closed (settable) |
| Switching reponce time | <10ms |
| Swith delay | 0.00s~1000.0s |
| Switching motion mode | Delay or windows mode |
| Analog signal output and max ohmic load RL | Current output   0/4...20mA, 20...4mA   RL≤0.5k |
| Voltage output   0...5/10v, 5/10...0v   RL>10k | |
| Screen display | OLED |
| Menu language | Chinese and English |
| Switch indicating | 2 Red LED |
| Displaying units | psi,bar,mbar,Pa,kPa,MPa |
| Buttons | 3 blue back-lighted touch buttons |
| Supplementary variables displaying | Environment temperature, analog output value, max peak value,mini peak value |
| Supplementary variables displaying way | Fixed displaying or switch display by INFO button |
| Working temperature | -30-80ºC |
| Media temperature | -30-80ºC |
| Storage temperature | -40ºC~80ºC |
| Electromagnetism compatible | GB/T 17626.2/3/4-2006 |
| Shock resistance | ≤10g/10Hz...500Hz(IEC 60068-2-6-2007) |
| Vibration resistance | ≤50g/11ms(IEC 60068-2-27-2008) |
| Protection class | IP65 |
Dimensions - SPS Sanitary Electronic Pressure Switch
Â
Payment Terms
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
Â
SPS Flat Membrane Vegetable Oil Sanitary Electronic Pressure Switch1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
Â
The pressure switch SPS is designed for pressure monitoring and measure-ment in liquid and gaseous media. The SPS is suited for general industrial applications such as machine and plant engineering, in machine tool systems, in hydraulic and pneumatic systems, for pressure monitoring and control and for pumps and compressors. It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching outputs (PNP or NPN). In addition, there are configurations available with an analog output signal (0...20mA| 420 mA or 0...5V| 010 V) as well as with RS485 Link.
WNK Intelligent Switch Series:
SPS Intelligent Pressure Switch
SLS Intelligent Level Switch
STS Intelligent Temperature Switch
SPS-1 Intelligent Sanitary Flat Diaphram Pressure Switch
 Features - SPS Sanitary Electronic Pressure SwitchÂ
1.  Sanitary type used in food and pharmaceuticals industry
2. Â Gas and liquid pressure measurement
3.  PNP switching, voltage and current outputs
4.  Switching can be set normally open / normally closed
5.  Supporting Switching delay
6.  Various analog output ways available
7.  Displaying pressure peak value and environment temperature
8.  Analog output span settable
9.  OLED self-luminous display
10.  Display turnable 180°
11.  Housing with electrical connection against process connection rotatable 330°
12.  Switching points settable
13.  Various display pressure units
14.  Parameters setting up for Password protection
15.  Support MODBUS communication
Specification - SPS Sanitary Electronic Pressure Switch
Â
| Product name | Electronic Smart Pressure Switch |
| Measuring range | -0.10.1MPa to 60MPa |
| Measuring media | Gas & Fluid |
| Accuracy | ≤0.5%FS |
| Supply power | 1230V DC |
| Temp. error | ±0.02%FS/ºC(Zero/ Full Span) |
| Long-term stability | ±0.3%FS/Year |
| Analog output accuracy | ≤±0.2%FS |
| Output configurations | 2×PNP + 0V~5VDC/10VDC + MODBUS |
| 2×PNP + 0mA/4mA~20mADC + MODBUS | |
| Switch current | 1.0A(Max.) |
| Switching type | Normally open / closed (settable) |
| Switching reponce time | <10ms |
| Swith delay | 0.00s~1000.0s |
| Switching motion mode | Delay or windows mode |
| Analog signal output and max ohmic load RL | Current output   0/4...20mA, 20...4mA   RL≤0.5k |
| Voltage output   0...5/10v, 5/10...0v   RL>10k | |
| Screen display | OLED |
| Menu language | Chinese and English |
| Switch indicating | 2 Red LED |
| Displaying units | psi,bar,mbar,Pa,kPa,MPa |
| Buttons | 3 blue back-lighted touch buttons |
| Supplementary variables displaying | Environment temperature, analog output value, max peak value,mini peak value |
| Supplementary variables displaying way | Fixed displaying or switch display by INFO button |
| Working temperature | -30-80ºC |
| Media temperature | -30-80ºC |
| Storage temperature | -40ºC~80ºC |
| Electromagnetism compatible | GB/T 17626.2/3/4-2006 |
| Shock resistance | ≤10g/10Hz...500Hz(IEC 60068-2-6-2007) |
| Vibration resistance | ≤50g/11ms(IEC 60068-2-27-2008) |
| Protection class | IP65 |
Dimensions - SPS Sanitary Electronic Pressure Switch
Â
Payment Terms
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
Â
1. Port of Loading: Shanghai ChinaÂ
2. Samples Lead Time: 3-7 working days
3. Delivery Time: 7-15 working days after paymentÂ
4.Payment: T/T, Western Union, PaypalÂ
After-sales service
We promise to deliver the following after-sales service:
1. Warranty: The warranty period is 12 months starting from the shipping date;Â
2. Customers will enjoy free repair services for failures found within the warranty due to manufacturing quality;
3. For on-site services not caused by manufacturing quality, we shall charge a certain service fee at our discretion based on actual charges such as travel expense;
4. We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Production Line
Â
Now we connect more and more computer devices, such as wireless keyboard and mouse adapter, Bluetooth adapter, U disk, card reader, USB fan, bank U shield and so on, the computer's USB 3.0 interface is not enough. Today to recommend the product is superior launched 4 Port USB HUBS, it expanded out of four additional USB interface, USB C Hubs can meet the needs of everyone connected to the daily equipment. At the same time the product does not drive and does not need additional power connection, very small.
You can connect an HDMI port, two USB-A ports, and two USB-C ports to the USB HUBS through the USB4 port on the laptop. Video output interface for HDMI 2.1 specifications, the highest support 8K@60Hz, and downward compatible with 4K@144Hz, 1080P 240Hz and other video specifications. Four USB data transmission interfaces are USB 3.2Gen2 protocol, the theoretical transmission rate is 10Gbps, the measured transmission speed can reach 940MB/s.
4 Port Usb Hubs,4 Port Mini Usb Hub,4 Port Usb 3.0 Hub,4 Port Powered Usb Hub
Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com