Digital display simple beam impact testing machine

1. Digital display simple beam impact testing machine Model: TY-4020-5\50D This series of digital impact testing machine is mainly used for non-metal such as hard plastic, reinforced nylon, glass fiber reinforced plastic, ceramic, cast stone, electric insulating material. Determination of impact toughness of materials. It is an ideal test equipment for chemical industry, scientific research units, universities and colleges, and quality inspection departments.

Second, the digital display simple beam impact testing machine features: 1, this series of impact testing machine is the use of microcomputer technology developed and developed intelligent digital impact testing machine. The advanced is that it can automatically correct the energy loss caused by friction and wind resistance, and get rid of the numerical chart of energy correction due to the influence of resistance. (The detection of the residual energy of the pendulum and the correction of the energy loss after the sample breaks are completed once during the impact process). 2. This series of impact testing machines adopts electronic display test results to make the readings more intuitive and improve the accuracy and accuracy of the impact machine. 3. Rotary encoder garden grating angle measurement technology has the advantages of high precision, good stability and large measuring range. The digital display automatically corrects the thrust energy, impact strength, pre-elevation angle, elevation angle, average value and energy loss. 4. The main technical parameters of TY-JZL-5\50D series simply supported beam impact testing machine are in full compliance with IS0 179, GB/T 1043, JB/T 8762 standard regulations.

Third, the digital display simply supported beam impact test machine simply supported beam impact: 1, impact speed: 2.9m / s, 3.8m / s; 2, pendulum energy: 2J, 4J, 5J; (JZL-5) 7.5J, 15J, 25J (JZL-25) 25J, 50J (JZL-50) 3, pendulum center to sample center distance: 221mm, 380mm4, pendulum angle: 150 °6, jaw support spacing: 40mm, 60mm, 70mm , 95mm7, support blade fillet radius: R = 1mm8, impact blade angle: 30 °9, impact blade fillet radius: R = 2mm10, size: height is 800MM, width 700mm, front and rear is 300mm11, weight: 90KG