Standard:
IEC60502, BS6346, VDE, AS/NZS, UL, etcÂ
The Rated Voltage(kv):
1st  class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35Â
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 -Â 26/35
Application:
XLPE insulated power cable has a number of advantages compared with paper insulated and PVC insulated cables. XLPE cable has high electric property, mechanical property, heat aging performance, environmental stress crack resistance, chemical corrosion resistance, and it also has simple structure, convenient operation and it is not restricted by laying in large difference of level. It can be applied in high temperature of 90 degree for a long time.
PVC insulated power cable is suitable for laying fixed in power transmission and distribution lines with A.C. 50HZ and rated voltage of 0.6/1kV.
TYPE |
NAME |
Main Application |
|
CU core |
AL core |
||
YJV/YJY |
YJLV/YJLY |
XLPE insulated,PVC/PE sheathed power cable |
For laying indoor ,tunnel,canal and underground. |
YJV22/YJV23 |
YJLV22/YJLV23 |
XLPE insulated,steel tape armored, |
For laying indoor ,tunnel,canal and underground. |
YJV32/YJV33 |
YJLV32/YJLV33 |
XLPE insulated,thin steel wire armored, |
For laying in shaft,water underground will large difference of level. |
YJV42/YJV43 |
YJLV42/YJLV43 |
XLPE insulated,thick steel wire armored, |
For laying in water and seabed. |
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal SectionÂ
Area(mm2) :1.5 2.5 4Â 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Features:
1). XLPE insulated power cable not only has excellent electric, mechanical properties, but also has powerful resistance against chemical erosion, heat-aging and environmental stress.
2) .Its structures are simple. The long term operating temperature is +90 degrees. It is convenient to use and can be laid with no restriction of different level.
3). Our XLPE cables can be produced according to our specification which is equivalent to IEC 502-1983, and its some indexes are superior to 502-1983.
4). We can design and manufacture special XLPE cable according to the other standards required by the customers.
5).Application: for laying indoor, tunnel, canal and underground.Â
Specification
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Alum Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 1x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 10.9 |
| 1x6 | 2.8 | 0.7 | 1 | 0.8 | 1.8 | 11.4 |
| 1x10 | 3.6 | 0.7 | 1 | 0.8 | 1.8 | 12.2 |
| 1x16 | 4.5 | 0.7 | 1 | 0.8 | 1.8 | 13.1 |
| 1x25 | 5.6 | 0.9 | 1 | 0.8 | 1.8 | 14.6 |
| 1x35 | 6.7 | 0.9 | 1 | 1.25 | 1.8 | 16.6 |
| 1x50 | 8 | 1 | 1 | 1.25 | 1.8 | 18.1 |
| 1x70 | 9.4 | 1.1 | 1 | 1.25 | 1.8 | 19.7 |
| 1x95 | 11 | 1.1 | 1 | 1.6 | 1.8 | 22 |
| 1x120 | 12.4 | 1.2 | 1 | 1.6 | 1.8 | 23.6 |
| 1x150 | 13.8 | 1.4 | 1 | 1.6 | 1.8 | 25.4 |
| 1x185 | 15.3 | 1.6 | 1 | 1.6 | 1.8 | 27.4 |
| 1x240 | 17.5 | 1.7 | 1 | 1.6 | 1.9 | 29.9 |
| 1x300 | 19.5 | 1.8 | 1 | 2 | 2 | 33.1 |
| 1x400 | 22.6 | 2 | 1.2 | 2 | 2.2 | 37.3 |
| 1x500 | 25.2 | 2.2 | 1.2 | 2 | 2.3 | 40.5 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 2x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 12.8 |
| 2x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 13.6 |
| 2x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 14.6 |
| 2x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 16.5 |
| 2x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.1 |
| 2x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 19.9 |
| 2x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 23.6 |
| 2x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 25.8 |
| 2x50 | 8 | 1 | 1 | 1.6 | 1.9 | 29 |
| 2x70 | 9.4 | 1.1 | 1 | 2 | 2 .3 | 3.2 |
| 2x95 | 11 | 1.1 | 1.2 | 2.1 | 3 | 7.1 |
| 2x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 40.5 |
| 2x150 | 13.8 | 1.4 | 1.2 | 2.5 | 2.4 | 45.4 |
| 2x185 | 15.3 | 1.6 | 1.4 | 2.5 | 20.6 | 49.9 |
| 2x240 | 17.5 | 1.7 | 1.4 | 2.5 | 20.7 | 55.1 |
| 2x300 | 19.5 | 1.8 | 1.6 | 2.5 | 20.9 | 60.2 |
| 2x400 | 22.6 | 2 | 1.6 | 2.5 | 30.1 | 67.7 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 3x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 13.2 |
| 3x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.1 |
| 3x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 15.2 |
| 3x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 17.1 |
| 3x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.9 |
| 3x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 20.8 |
| 3x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 24.7 |
| 3x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 27.2 |
| 3x50 | 8 | 1 | 1 | 1.6 | 1.9 | 30.6 |
| 3x70 | 9.4 | 1.1 | 1 | 2 | 2.1 | 35.2 |
| 3x95 | 11 | 1.1 | 1.2 | 2 | 2.2 | 39.3 |
| 3x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 43 |
| 3x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.5 | 48.6 |
| 3x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.7 | 53 |
| 3x240 | 17.5 | 1.7 | 1.4 | 2.5 | 2.8 | 58.5 |
| 3x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3 | 64 |
| 3x400 | 22.6 | 2 | 1.6 | 3.15 | 3.3 | 73.5 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
||
| mm² | mm | mm | mm | mm | mm | mm | mm | mm |
| 3x 16/10 | 4.5 | 3.6 | 0.7 | 0.7 | 1 | 1.6 | 1.8 | 22.7 |
| 3x 25/16 | 5.6 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.8 | 26.5 |
| 3x 35/16 | 6.7 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.9 | 29 |
| 3x 50/25 | 8 | 5.6 | 1 | 0.9 | 1 | 1.6 | 2.1 | 33 |
| 3x 70/35 | 9.4 | 6.7 | 1.1 | 0.9 | 1.2 | 2 | 2.2 | 38 |
| 3x 95/50 | 11 | 8 | 1.1 | 1 | 1.2 | 2 | 2.3 | 42.4 |
| 3x120/70 | 12.4 | 9.4 | 1.2 | 1.1 | 1.2 | 2 | 2.5 | 48 |
| 3x150/70 | 13.8 | 9.4 | 1.4 | 1.1 | 1.4 | 2.5 | 2.7 | 52 |
| 3x185/95 | 15.3 | 11 | 1.6 | 1.1 | 1.4 | 2.5 | 2.8 | 57.2 |
| 3x240/120 | 17.5 | 12.4 | 1.7 | 1.2 | 1.6 | 2.5 | 3.1 | 64 |
| 3x300/150 | 19.5 | 13.8 | 1.8 | 1.4 | 1.6 | 2.5 | 3.2 | 69.8 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 4x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 14 |
| 4x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.9 |
| 4x4 | 2.3 | 0.7 | 1 | 1.25 | 1.8 | 17 |
| 4x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 18.2 |
| 4x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 20.2 |
| 4x16 | 4.5 | 0.7 | 1 | 1.6 | 1.8 | 23 |
| 4x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 26.7 |
| 4x35 | 6.7 | 0.9 | 1 | 1.6 | 1.9 | 29.5 |
| 4x50 | 8 | 1 | 1 | 2 | 2.1 | 34.2 |
| 4x70 | 9.4 | 1.1 | 1.2 | 2 | 2.2 | 38.8 |
| 4x95 | 11 | 1.1 | 1.2 | 2 | 2.3 | 42.9 |
| 4x120 | 12.4 | 1.2 | 1.4 | 2.5 | 2.5 | 48.6 |
| 4x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.7 | 53.2 |
| 4x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.8 | 58.1 |
| 4x240 | 17.5 | 1.7 | 1.6 | 2.5 | 3.1 | 64.8 |
| 4x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3.2 | 70.4 |
| 4x400 | 22.6 | 2 | 1.8 | 3.15 | 3.6 | 81.3 |
Packaging
Packing Details  : Packing in wooden drum, iron-wooden drum or as customer's requirement.
Delivery Details :Â 15-25 days after place an order.
About Us
People's Cable Group Co., Ltd. Was founded in 2007, with good transport facilities which adjacent to the 310 national highway-Lian Huo highway. Our company had 2Â factories(Zhitian factory and Zhulin factory), occupies total area of more than 300,000 square meters, with building area 230,000 square meters. The real capital assets more than 10 million USD, with 630 staff members, 65 of which are professional and technical experts.
Our mainly products as follow:Â
1--pvc insulated electric wire whatever copper conductor,aluminum conductor, CCA(copper clad aluminum), CCS(copper clad steel).
2--pvc and xlpe insulated power cable with or without armor upto 35kv.
3--rubber cable like welding cable, mine cable, EPR cable and so on.
4--aerial bundled cable(ABC cable) up to 10kv.
5--bare conductor like AAC, AAAC, ACSR, ACAR, ACSR/AW, aluminum clad steel wire, galvanized steel wire, PC steel wire and so on.
Customer Vist
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you.
With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!
Certification
As top rank of the cable supplier in China, we have obtained CCC, ISO9001, ISO14001, OHSAS certificates, passed the SGS and BV test, and our brand "RMJT" be given China famous brand.
FAQ:
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.
Are you a trading company or manufacture?
RMJT is a professional manufacturer in Henan, China.
What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless its customed-made.
Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality.sample is free but the freight charge should be paid.
How long get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days
How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.
How is the payment?
T/T, L/C is accepted.
What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.
Standard:
IEC60502, BS6346, VDE, AS/NZS, UL, etcÂ
The Rated Voltage(kv):
1st  class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35Â
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 -Â 26/35
Application:
XLPE insulated power cable has a number of advantages compared with paper insulated and PVC insulated cables. XLPE cable has high electric property, mechanical property, heat aging performance, environmental stress crack resistance, chemical corrosion resistance, and it also has simple structure, convenient operation and it is not restricted by laying in large difference of level. It can be applied in high temperature of 90 degree for a long time.
PVC insulated power cable is suitable for laying fixed in power transmission and distribution lines with A.C. 50HZ and rated voltage of 0.6/1kV.
TYPE |
NAME |
Main Application |
|
CU core |
AL core |
||
YJV/YJY |
YJLV/YJLY |
XLPE insulated,PVC/PE sheathed power cable |
For laying indoor ,tunnel,canal and underground. |
YJV22/YJV23 |
YJLV22/YJLV23 |
XLPE insulated,steel tape armored, |
For laying indoor ,tunnel,canal and underground. |
YJV32/YJV33 |
YJLV32/YJLV33 |
XLPE insulated,thin steel wire armored, |
For laying in shaft,water underground will large difference of level. |
YJV42/YJV43 |
YJLV42/YJLV43 |
XLPE insulated,thick steel wire armored, |
For laying in water and seabed. |
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal SectionÂ
Area(mm2) :1.5 2.5 4Â 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Features:
1). XLPE insulated power cable not only has excellent electric, mechanical properties, but also has powerful resistance against chemical erosion, heat-aging and environmental stress.
2) .Its structures are simple. The long term operating temperature is +90 degrees. It is convenient to use and can be laid with no restriction of different level.
3). Our XLPE cables can be produced according to our specification which is equivalent to IEC 502-1983, and its some indexes are superior to 502-1983.
4). We can design and manufacture special XLPE cable according to the other standards required by the customers.
5).Application: for laying indoor, tunnel, canal and underground.Â
Specification
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Alum Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 1x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 10.9 |
| 1x6 | 2.8 | 0.7 | 1 | 0.8 | 1.8 | 11.4 |
| 1x10 | 3.6 | 0.7 | 1 | 0.8 | 1.8 | 12.2 |
| 1x16 | 4.5 | 0.7 | 1 | 0.8 | 1.8 | 13.1 |
| 1x25 | 5.6 | 0.9 | 1 | 0.8 | 1.8 | 14.6 |
| 1x35 | 6.7 | 0.9 | 1 | 1.25 | 1.8 | 16.6 |
| 1x50 | 8 | 1 | 1 | 1.25 | 1.8 | 18.1 |
| 1x70 | 9.4 | 1.1 | 1 | 1.25 | 1.8 | 19.7 |
| 1x95 | 11 | 1.1 | 1 | 1.6 | 1.8 | 22 |
| 1x120 | 12.4 | 1.2 | 1 | 1.6 | 1.8 | 23.6 |
| 1x150 | 13.8 | 1.4 | 1 | 1.6 | 1.8 | 25.4 |
| 1x185 | 15.3 | 1.6 | 1 | 1.6 | 1.8 | 27.4 |
| 1x240 | 17.5 | 1.7 | 1 | 1.6 | 1.9 | 29.9 |
| 1x300 | 19.5 | 1.8 | 1 | 2 | 2 | 33.1 |
| 1x400 | 22.6 | 2 | 1.2 | 2 | 2.2 | 37.3 |
| 1x500 | 25.2 | 2.2 | 1.2 | 2 | 2.3 | 40.5 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 2x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 12.8 |
| 2x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 13.6 |
| 2x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 14.6 |
| 2x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 16.5 |
| 2x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.1 |
| 2x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 19.9 |
| 2x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 23.6 |
| 2x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 25.8 |
| 2x50 | 8 | 1 | 1 | 1.6 | 1.9 | 29 |
| 2x70 | 9.4 | 1.1 | 1 | 2 | 2 .3 | 3.2 |
| 2x95 | 11 | 1.1 | 1.2 | 2.1 | 3 | 7.1 |
| 2x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 40.5 |
| 2x150 | 13.8 | 1.4 | 1.2 | 2.5 | 2.4 | 45.4 |
| 2x185 | 15.3 | 1.6 | 1.4 | 2.5 | 20.6 | 49.9 |
| 2x240 | 17.5 | 1.7 | 1.4 | 2.5 | 20.7 | 55.1 |
| 2x300 | 19.5 | 1.8 | 1.6 | 2.5 | 20.9 | 60.2 |
| 2x400 | 22.6 | 2 | 1.6 | 2.5 | 30.1 | 67.7 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 3x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 13.2 |
| 3x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.1 |
| 3x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 15.2 |
| 3x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 17.1 |
| 3x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.9 |
| 3x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 20.8 |
| 3x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 24.7 |
| 3x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 27.2 |
| 3x50 | 8 | 1 | 1 | 1.6 | 1.9 | 30.6 |
| 3x70 | 9.4 | 1.1 | 1 | 2 | 2.1 | 35.2 |
| 3x95 | 11 | 1.1 | 1.2 | 2 | 2.2 | 39.3 |
| 3x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 43 |
| 3x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.5 | 48.6 |
| 3x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.7 | 53 |
| 3x240 | 17.5 | 1.7 | 1.4 | 2.5 | 2.8 | 58.5 |
| 3x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3 | 64 |
| 3x400 | 22.6 | 2 | 1.6 | 3.15 | 3.3 | 73.5 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
||
| mm² | mm | mm | mm | mm | mm | mm | mm | mm |
| 3x 16/10 | 4.5 | 3.6 | 0.7 | 0.7 | 1 | 1.6 | 1.8 | 22.7 |
| 3x 25/16 | 5.6 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.8 | 26.5 |
| 3x 35/16 | 6.7 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.9 | 29 |
| 3x 50/25 | 8 | 5.6 | 1 | 0.9 | 1 | 1.6 | 2.1 | 33 |
| 3x 70/35 | 9.4 | 6.7 | 1.1 | 0.9 | 1.2 | 2 | 2.2 | 38 |
| 3x 95/50 | 11 | 8 | 1.1 | 1 | 1.2 | 2 | 2.3 | 42.4 |
| 3x120/70 | 12.4 | 9.4 | 1.2 | 1.1 | 1.2 | 2 | 2.5 | 48 |
| 3x150/70 | 13.8 | 9.4 | 1.4 | 1.1 | 1.4 | 2.5 | 2.7 | 52 |
| 3x185/95 | 15.3 | 11 | 1.6 | 1.1 | 1.4 | 2.5 | 2.8 | 57.2 |
| 3x240/120 | 17.5 | 12.4 | 1.7 | 1.2 | 1.6 | 2.5 | 3.1 | 64 |
| 3x300/150 | 19.5 | 13.8 | 1.8 | 1.4 | 1.6 | 2.5 | 3.2 | 69.8 |
| Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
| mm² | mm | mm | mm | mm | mm | mm |
| 4x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 14 |
| 4x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.9 |
| 4x4 | 2.3 | 0.7 | 1 | 1.25 | 1.8 | 17 |
| 4x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 18.2 |
| 4x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 20.2 |
| 4x16 | 4.5 | 0.7 | 1 | 1.6 | 1.8 | 23 |
| 4x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 26.7 |
| 4x35 | 6.7 | 0.9 | 1 | 1.6 | 1.9 | 29.5 |
| 4x50 | 8 | 1 | 1 | 2 | 2.1 | 34.2 |
| 4x70 | 9.4 | 1.1 | 1.2 | 2 | 2.2 | 38.8 |
| 4x95 | 11 | 1.1 | 1.2 | 2 | 2.3 | 42.9 |
| 4x120 | 12.4 | 1.2 | 1.4 | 2.5 | 2.5 | 48.6 |
| 4x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.7 | 53.2 |
| 4x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.8 | 58.1 |
| 4x240 | 17.5 | 1.7 | 1.6 | 2.5 | 3.1 | 64.8 |
| 4x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3.2 | 70.4 |
| 4x400 | 22.6 | 2 | 1.8 | 3.15 | 3.6 | 81.3 |
Packaging
Packing Details  : Packing in wooden drum, iron-wooden drum or as customer's requirement.
Delivery Details :Â 15-25 days after place an order.
About Us
People's Cable Group Co., Ltd. Was founded in 2007, with good transport facilities which adjacent to the 310 national highway-Lian Huo highway. Our company had 2Â factories(Zhitian factory and Zhulin factory), occupies total area of more than 300,000 square meters, with building area 230,000 square meters. The real capital assets more than 10 million USD, with 630 staff members, 65 of which are professional and technical experts.
Our mainly products as follow:Â
1--pvc insulated electric wire whatever copper conductor,aluminum conductor, CCA(copper clad aluminum), CCS(copper clad steel).
2--pvc and xlpe insulated power cable with or without armor upto 35kv.
3--rubber cable like welding cable, mine cable, EPR cable and so on.
4--aerial bundled cable(ABC cable) up to 10kv.
5--bare conductor like AAC, AAAC, ACSR, ACAR, ACSR/AW, aluminum clad steel wire, galvanized steel wire, PC steel wire and so on.
Customer Vist
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you.
With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!
Certification
As top rank of the cable supplier in China, we have obtained CCC, ISO9001, ISO14001, OHSAS certificates, passed the SGS and BV test, and our brand "RMJT" be given China famous brand.
FAQ:
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.
Are you a trading company or manufacture?
RMJT is a professional manufacturer in Henan, China.
What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless its customed-made.
Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality.sample is free but the freight charge should be paid.
How long get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days
How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.
How is the payment?
T/T, L/C is accepted.
What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.
The advantage of USB Cable Type C is that it supports higher current, that is that more current can be passed by Type-C in the same time. In this way, the charging speed of the device can be accelerated. At present, the charging current of most Type-C data lines is generally 2A. If the charging rate of 3A is to be reached, a high-current wall charging matching it is required. That is to say, if the wall charge only supports 1A, whether it is charged with 2A or 3A data line, there is no difference fundamentally. If the current supported by the wall charging is 2A, and the type-C data cable of 2A/3A is matched, the effect can be significantly changed.
In addition, the device equipped with the Type-C interface can be charged by connecting the mobile power supply through the Type-C cable or Usb C Cable. Users do not need to carry the charging cable, but can have the wall charging and Type-C cable. In addition, when selecting a Type-C charging cable, We should pay attention to the current limit. The charging data cable 1A does not have fast charging performance, 2A is the most commonly used Type-C charging data line, and 3A is the best data line at present. If you want to have fast charging effect, you must choose the Type-C charging data line with 3A current.
The highlights of Type-C interface are thinner design, faster transmission speed (USB3.1 up to 10Gbps) and stronger power transmission (up to 100W).The biggest feature of Type-C double-sided plugable interface is that it supports double-sided insertion of USBinterface. Officially solved the USB never insert the worldwide problem, the front and the back of the random plug.The USB Cable used with it must also be thinner and lighter.
Usb Cable Type C,Usb Type C Cable,Type C 3.0 Cable,Usb Type C Data Cable
Henan Yijiao Trading Co., Ltd , https://www.yjusbcable.com